Product Description Bedec Multi Surface Paint is a paint for use both inside and outside with a built in universal primer. A proven water-based paint that resists flaking or peeling due to it’s outstanding flexibility. Easy to apply directly onto almost anything, including (but not limited to) plastic, wood, metal, cladding, brick, UPVC, MDF, and tiles! As it is a water-based product it all but eliminates yellowing with age, and it makes it very convenient to clean up using water. Choose from a range of colours in Matt, Satin and Gloss finishes. If you cannot see the colour or size you require please send us an email. Please note certain colours are only available in some finishes and sizes. Surface preparation Ensure the surfaces to be painted are clean, dry and free from dust, dirt, grease and wax Remove all loose and defective paint Remove and treat any Algal, mould and fungal growths with a fungicidal wash. Smooth glossy surfaces should be lightly abraded to provide a key For specific surface preparation instructions please refer to the data sheet below Directions for use Stir well and check colour before use in case any of the product has settled in the tin. Apply with a brush, roller, conventional H.V.L.P or airless spray Do not apply at air or surface temperatures below 8°C, when likely to rain before the paint has fully dried or above 30°C as this may cause uneven drying. Apply two to three coats to sealed surfaces allowing each coat to dry thoroughly Do not over spread Recoatable after approximately 4 hours Tips for use Be mindful that spraying can reduce the coverage rate depending on the type of spray equipment you are using Clean up immediately after use with warm soapy water. Ensure when using a roller sleeve that it is washed out thoroughly and left slightly damp before use, to remove loose fibres, dust and to create a liquid barrier between the paint and the roller to avoid the paint absorbing into the roller. Key Benefits Resists flaking and cracking Chalks much less No special thinners required Low VOC Alkali resistant Heat resistant up to 80 Degrees Celsius Technical Information Bedec Multi Surface Technical Data Sheet
